Product Descriptions:

• Full feature, multi-function control panel with alarm display
• Hermetically sealed piston refrigerant compressor, high efficient condenser
• Fully adjustable, programmable electronic drain valve to minimize air loss
• Satisfies ISO 7183 industry standards
• Advanced full feature control panel with history of 10 alarms and remote alarm contact
• IP42 electical rating

IR Compressor, Small Refrigated Dryers
Kompresor IR (Ingersoll Rand), 230V/50 Hz. Dilengkapi dengan Kondensator efisiensi tinggi. 3 In 1 Low Pressure 

STOCK READY

• Air cooled R134a, 3 in 1 low pressure drop aluminium heat exchanger
• Integrated general purpose filter removing air particle up to 1 micron
• Integrated aftercooler to handle inlet temperature up to 90 °C
• Electronic drain as standard
• Advanced full feature control panel with history of 10 alarms
• IP42 electrical rating

IR Compressor, High Inlet Temperature Refrigated Dryer
Kompresor IR dengan temperatur inlet hingga 90 °C. Dilengkapi dengan full feature control panel history hingga 10 alarm kebelakang

Product Descriptions:

• Air cooled R507a, 3 in 1 Low Pressure Drop Aluminium heat exchanger
• Stainless Steel Demister / High Efficiency Condenser
• Anti-freezing/energy saving function
• Electronic No Loss Drain (ENLD) as Standard
• Advanced Control Panel with dew pont indication and remote ON/OFF (From D1300IN-A)
• History of latest 10 alarms (D600IN-A to D950IN-A) and 50 alarms (D1300IN-A to D5400IN-A)

SOLD OUT

Product Descriptions:

• Air cooled R134A, 3 in 1 Low Pressure Drop Aluminium heat exchanger
• Hermetically sealed piston refrigerant compressor, high efficient condenser
• Variable speed fan, controlled by the dryer controller
• Electronic drain as standard
• Advanced full feature control panel with history of 10 alarms and remote alarm contact
• IP42 electical rating

IR Compressor, Small Refrigated Dryers
Kompresor IR (Ingersoll Rand), 230V/50 Hz. Dilengkapi dengan Kondensator efisiensi tinggi. 3 In 1 Low Pressure 

SOLD OUT

• Inlet (high efficiency) and outlet (general purpose) heavy duty filters supplied with all dryers
• Control panel dispay, tower status (drying and regeneration) operating and purge times/operating hours
• Alarm: high dew point, time of alarm, history of last 20 alarms, high outlet temperature, blower failure
• Enegy management system available as standard feature to reduce operating costs by measuring the outlet dewpoint and adjusting the cycle time accordingly to save enery

IR Compressor, Heated Blower Desiccant Dryers
Kompresor IR (Ingersoll Rand) Heated Blower, Desiccant Dryer 400 V/50 Hz

• Inlet (high efficiency) and outlet (general purpose) heavy duty fiters supplied with all dryers
• Control panel dispay: tower status (drying and regeneration) operation, purge times operation hours
• Alarms: high dew point (opt), fail to shift (opt), time of alarm, history of last 20 alarms
• Desiccant bed allows -40 °C (std) and -70 °C (opt) pressure dew point
• Enery management system availale as an option to reduce operating costs by measuring the outlet
• Dewpoint and adjusting the cycle time accordingly to save energy

IR Compressor, Heatless Desiccant Dryers
Kompresor IR (Ingersoll Rand), 230V/50 Hz dengan teknologi pendingin yang memungkinkan kompresor tidak cepat panas

• Inlet (high efficiency) and outlet (general purpose) heavy duty fiters supplied with all dryers
• Control panel dispay: tower status (drying and regeneration) operation, purge times operation hours
• Alarms: high dew point (opt), fail to shift (opt), time of alarm, history of last 20 alarms
• Desiccant bed allows -40 °C (std) and -70 °C (opt) pressure dew point
• Enery management system availale as an option to reduce operating costs by measuring the outlet
• Dewpoint and adjusting the cycle time accordingly to save energy

IR Compressor, Heatless Desiccant Dryers
Kompresor IR (Ingersoll Rand), 230V/50 Hz, dilengkapi dengan tekhnologi penghemat energi

• Air cooled R134a, 3 in 1 low pressure drop aluminium heat exchanger
• Hermetically sealed piston refrigerant compressor, high efficiency condenser
• Variable speed fan, controlled by dryer controller
• Electronic drain as standard
• Advanced full feature control panel with history of 10 alarms and remote alarm contact
• IP42 electrical rating

IR Compressor, High Pressure Small Refrigated Dryers
Kompresor IR Air Cooled 3 in 1 low pressure 230V/50 Hz. Dilengkapi dengan dryer controller untuk mengatur putaran kipas, remote alarm dan full feature control panel history

SOLD OUT

STANDARD EQUIPMENT - BARE COMPRESSOR

 1) Ball Bearing Compressor

 2) Centrifugal Unloader

 3) Low oil level switch for 7T2, 15T2, 15T4, H15T4 & H15T6 only.

 4) Auto-condensate drain trap standard on 15T2, 223, 15T4, H15T4 & H15T6 only

 5) Auxiliary valve & inlet unloader when Constant Speed Control is ordered.

 6) Pressure switch is not included for Auto Stop & Start Control.

i) XL740HT lubricant

ii) Interstage safety valves & pressure gauges

• Regulation: Standard - Auto Stop/Start
• Constant speed available at additional cost on 7T4, 15T2, H15T4 and H15T6 package
• Standard constant speed control on PA models
• Auto condensate drain trap standard on 15T4, H15T4 and H15T6
• Direct-on-line starter standard for 15hp and below
• Star-delta starter standard for 20hp 
• Low oil level switch standard on 15T4, H15T4 
• Pressure switch included (supplied loose)
• 100% cast icon frame and separately-cast cylinders
• Precison machined high quality cast iron cylinders with deep radial fins, suitable for heavy duty operation and longer life
• Heat treated stainles steel finger valve assemby, provides a large flow are resulting in lesser heat and carbon build-up. Easy removal & servicing
• Runs cooler, resulting in a more efficient compressor that consumes lesser power and lasts longer
• Precision balanced for smooth running with replaceable crankpin bushing that protects the crankshaft from damage
• Rugged one-piece connecting rod
• Solid-end precision type. No bolts or nuts which can come loose
• Factory-filled syntetic lubricants, reduces carbon buildup, extends lubricant change period. Improves compressor performance and life span

SOLD OUT

• Regulation: Auto Stop/Start, 2340 thru 2545 series, H2340 thru H15T series
• Constant speed; 7100 thru 3000
• Centrifugal unloader for no load start on 2545, 7100, 3000 & H15T series, prevents motor from starting under load. Eliminates possibility of motor burn out
• 100% cast icon frame and separately-cast cylinders
• Precison machined high quality cast iron cylinders with deep radial fins, suitable for heavy duty operation and longer life
• Heat treated stainles steel finger valve assemby, provides a large flow are resulting in lesser heat and carbon build-up. Easy removal & servicing
• Efficient finned intercooler tubes. 
• Runs cooler, resulting in a more efficient compressor that consumes lesser power and lasts longer
• Balanced overhung crankshaft
• Precision balanced for smooth running with replaceable crankpin bushing that protects the crankshaft from damage
• Rugged one-piece connecting rod
• Solid-end precision type. No bolts or nuts which can come loose
• Factory-filled syntetic lubricants, reduces carbon buildup, extends lubricant change period. Improves compressor performance and life span

What do you get from a Standard Package?

• Heavy duty cast iron pump
• Efficient electric motor; built-in thermal relay (single phase), TEFC IP54 protection, Clss Finsulation (Three phase)
• Highly reliable magnetic starter; direct-on-line (3hp - 10hp), Star Delta (15hp - 30hp)
• Time proven parts and components
• Totally enclosed wired beltguard
• ASME coded air receiver with 3rd party certification

SOLD OUT

• Heavy duty cast iron pump
• Premium quality
• Powder coat painting enhances antirust
• Greater realiability
• Efficient cooling system
• Long term durability
• Regulation: Auto Stop/Start, 2340 thru 2545. Constant speed 7100 thru 3000 series
• Centrifugal unloader on 2545, 7100, 3000 & H15T
• Star-Delta starter on 2545C10/12 SD, Premiere Package and Standard Package with motor Horse Power above 20HP (includes 20HP)
• Receiver ASME - 220 PSIG (15.2 kg/cm2) max. Operation temperature 250°C
• Tank mounted model, starter mounted on machine
• Baseplate mounted model, DOL starter mounted on machine, SDS starter shipping loose with machine

What do you get from a Premiere Package?

• Full time low oil level protection switch
• Efficient electric motor (TEFC IP54 protection, Class Finsulation (Three phase)
• High reliable magnetic Starter (Star Delta (15hp - 30hp)
• Aircooled after-cooler
• Time proven parts & components
• Totally enclosed sheetmetal beltquard
• ASME coded air receiver with 3rd party certification

SOLD OUT

• Air quality to -40 °C ISO 8573 class 2 dew point performance
• Optional ISO 8573 class 1 dew point performance availale
• Filtration provided as standard (Filters shipped loose on models D41IM and above)
• Electronic control panel: D5IM-D34IM easy to read user interface D41M-D299IM interface with functionality wich allow also shows tower pressure gauges
• Low noise levels for point of use application

IR Compressor, Modular Desiccant Dryers
Filter modul untuk Kompresor IR (Ingersoll Rand), 230V/50 Hz, didesain secara khusus untuk mengurangi ataupun meredam suara/noise 

• Air quality to -40 °C ISO 8573 class 2 dew point performance
• Optional ISO 8573 class 1 dew point performance availale
• Filtration provided as standard (Filters shipped loose on models D41IM and above)
• Electronic control panel: D5IM-D34IM easy to read user interface D41M-D299IM interface with functionality wich allow also shows tower pressure gauges
• Low noise levels for point of use application

IR Compressor, Modular Desiccant Dryers 41IM and above
Filter modul untuk Kompresor IR (Ingersoll Rand), 230V/50 Hz, didesain secara khusus untuk mengurangi ataupun meredam suara/noise 

• Air quality to -40 °C ISO 8573 class 2 dew point performance
• Optional ISO 8573 class 1 dew point performance availale
• Filtration provided as standard (Filters shipped loose on models D41IM and above)
• Electronic control panel: D5IM-D34IM easy to read user interface D41M-D299IM interface with functionality wich allow also shows tower pressure gauges
• Low noise levels for point of use application

IR Compressor, Modular Desiccant Dryers
Filter modul untuk Kompresor IR (Ingersoll Rand), 230V/50 Hz, didesain secara khusus untuk mengurangi ataupun meredam suara/noise 

Option parts:

Note:

• 24335028 AUTO DRAIN F Series
• 24335036 MANUAL DRAIN F Series

Product Descriptions:

• Air quality to ISO 8573.1:2010/Class 1 oil
• Oil vapor and hydrocarbon odor removal at 21 °C
• Maximum remaining oil content of < 0.03 mg/m3
• Compliance with PED 97/23EC and CE
• Standard filters include gauge and 1/2" F Manual Valve

Option parts:

Note:

• 24335028 AUTO DRAIN F Series
• 24335036 MANUAL DRAIN F Series

Product Descriptions:

• Air quality to ISO 8573.1:2010/Class 1 Solid particulate, Class 1 oil
• Particle removal down to 0.01 micron
• Including wated and oil aerosols
• Compliance with PED 97/23EC and CE
• Standard filters include gauge and 1/4" M Automatic Drain

Option parts:

Note:

• 24335028 AUTO DRAIN F Series
• 24335036 MANUAL DRAIN F Series

Product Descriptions:

• Air quality to ISO 8573.1:2010/Class 2 Solid particulate, Class 2 oil
• Particle removal down to 0.03 micron
• Including coalesced liquid, water and oil
• Maximum remaining oil aerosol content of 0.03 mg/m3 at 21 °C
• Compliance with PED 97/23EC and CE
• Standard filters include gauge and 1/4" M Automatic Drain

Option parts:

Note:

• 24335028 AUTO DRAIN F Series
• 24335036 MANUAL DRAIN F Series

Product Descriptions:

• Air quality to ISO 8573.1:2010/Class 3 Solid particulate
• Particle removal down to 1 micron
• Compliance with PED 97/23EC and CE
• Standard filters include gauge and 1/2" F Manual Valve

• Powerful 625ft lbs of max reverse, 500ft.lbs of forward torque to handle heavy-duty jobs
• The first choice and officially tool used by NASCAR pit crews for it's speed and power
• The fastest 1/2 inch impact tool available with adjustable requlator for optimum control and shock-absorbing comfort grip
• The Ingersoll Rand Thunder Gun 232TGSL delivers pit-crew power, speed at affordable cost

Revolutionary UP Series with key features:

• Industry-leading performance delivers more air for less horsepower, saving thousands of dollars per year on energy.
• Smart, Energy Efficient Controls. Industry-leading performance delivers more air for less horsepower, saving thousands of dollars per year on energy.
• Maximum Uptime. Ingersoll Rand is so confident in the performance of the UP-Series, that 5 and 7 year warranty programs are available. Contact your local Ingersoll Rand authorized service provider for availability and details.
• Installation Close to Point-of-Use
• Closely Maintained Pressure. Reducing discharge pressure and avoiding excessive pressure bands increases downstream tool and equipment life.
• 70% Fewer Connections. Smart integration eliminates leaks and pressure drops maximizing reliability.
• Compact Footprint Design frees up valuable floor space and reduces install costs.

STOCK READY

Revolutionary UP Series.

Integrated rotary screw air system for complete air solution designed to gain ultimate profitabiliy in today's business
See technical descriptions below.

STOCK READY

Main features:

• High efficiency IP55, 380-415V motor
• Electrical Rating: Standard NEMA1
• 2-Stage oil-free rotary screw airend
• Standard filter
• Automatic Start/Stop
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• IntellisysTM controller featuring:
• Finger touch control
• Automatic start & stop control
• Remote start & stop control
• 79 dB(A) Low sound enclosure

IR Compressor, Sierra 2-Stage Medium Rotary Screw Air Compressor
Kompresor IR 2 Stage otomatis, layar sentuh, tidak mengeluarkan suara bising/low noise. Kompresor rotary yang sangat efisien di kelasnya

Main features:

• High efficiency IP55, 380-415V/3PH/50HZ motor
• 2-Stage oil-free rotary screw airend
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• IntellisysTM controller featuring:
• Finger touch control
• Automatic start & stop control
• Remote start & stop control
• 79 dB(A) Low sound enclosure

IR Compressor, Sierra 2-Stage 90-150kW Medium Rotary Screw Air Compressor
Kompresor IR Air Cooled dilengkapi fitur IntellysysTM; layar sentuh, start/stop otomatis, tingkat suara sangat rendah

Main features:

• High efficiency TEFC, 380-415V/3PH/50HZ motor
• 2-Stage oil-free rotary screw airend
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• IntellisysTM controller featuring:
• Finger touch control
• Automatic start & stop control
• Remote start & stop control
• 79 dB(A) Low sound enclosure

IR Compressor, Sierra 2-Stage High efficiency TEFC, 380-415V/3PH/50HZ motor Medium Rotary Screw Air Compressor
Kompresor IR Air Cooled dilengkapi fitur IntellysysTM; layar sentuh, start/stop otomatis, tingkat suara sangat rendah

Main Features:

• Premium efficiency IP23 HPM motor
• No motor bearings
• Rugged IR oil-free airend with Ultra Coat
• 400V/3Ph/50Hz integral variable frequency drive
• Variable speed controlled fan motor
• Factory-fill of SSR Ultra Coolant
• IntellisysTM controller featuring:
• Infinite on-off control
• Self auditing function
• Integrated with Line Reactor inside

IR Compressor, Nirvana Mendium Rotary Screw Air Compressor
Kompresor IR SSR Ultra Coolant. Dilengkapi dengan tekhnologi IntellisysTM yang menghadirkan Infinite on-off control, self auditing, terintegrasi Line reactor dan fitur lainnya

Compressor options (separately available):

• Power Outage Restart (PORO) 
• Remote Pressure Transducer Panel Filter
• SSR H-1 Food Grade Coolant
• High Dust Filter n/a
• Outdoor Modification n/a

Main features:

• Premium efficiency IP23 HPM motor
• No motor bearings
• Rugged IR oil-free airend with Ultra Coat
• 400V/3Ph/50Hz integral variable frequency drive
• Variable speed controlled fan motor
• Factory-fill of SSR Ultra Coolant
• IntellisysTM controller featuring:
• Infinite on-off control
• Self auditing function

Main features:

• Premium efficiency IP23 HPM motor
• 96% efficiency rating
• No motor bearings
• Air or Water-Cooled aftercooler with condensate separator
• Factory-fill of Ingersoll Rand UltraCoolant
• Xe microprocessor controller providing:
• Sequence up to 4 machines
• Integrated with Line Reactor inside
• NEMA4 (IP65) Electrical Protection
• 74 dB(A) low sound enclosure

IR Compressor, Single Stage Medium Rotary Screw Air Compressor
Kompresor IR SSR Ultra Coolant. Dilengkapi dengan Xe Microprocessor yang menghadirkan sequence hingga 4 mesin, terintegrasi Line reactor, Electrical Protection dan fitur lainnya

Main features:

• Premium efficiency IP23 HPM motor
• 95.2% constant efficiency rating
• No motor bearings
• Rugged IR airend with duplex tapered roller bearings
• Air or Water-Cooled aftercooler with moisture separator
• 400V/3Ph/50Hz integral variable frequency drive
• Variable speed controlled fan motor
• Factory-fill of SSR UltraCoolant
• Xe microprocessor controller providing:
• Integrated with Line Reactor inside
• 30 Languages available & selectable via the controller
• (English, Chinese, Korean, Thai & Berhasa Indonesia)
• 69+3 dB(A) low sound enclosure (per IS0 2151; 2004)

Compressor options (separately available):

• Power Outage Restart (PORO) 
• Remote Pressure Transducer Panel Filter
• High Dust Filter n/a
• Outdoor Modification

Main features:

• Premium efficiency IP23 HPM motor
• 95.8% constant efficiency rating
• No motor bearings
• Rugged IR airend with duplex tapered roller bearings
• Air or Water-Cooled aftercooler with moisture separator
• 400V/3Ph/50Hz integral variable frequency drive
• Factory-fill of SSR UltraCoolant
• IntellisysTM controller featuring:
• Infinite on-off control
• Self auditing function
• Sound level: Air-cooled 75 db(A) Water-cooled 68 db(A)

IR Compressor, Nirvana High Dust Filter and Variable Frequency Drive Air Compressor
Kompresor IR Air or Water Cooled dengan tingkat efisiensi konstan 95.8%

Main features:

• High efficiency IP23, 415V/3PH/50HZ or 6000V/3PH/50HZ Motor
• IP23 Electrics
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter(LV model)
• Factory-fill of SSR UltraCoolant
• Energy saving Intellisys capacity control system featuring:
• Digital inlet control valve (SG control)
• 4 unit integral sequencer (SG control)
• Upper range modulation
• 85 dB(A) (Air-cooled)/82 dB(A) (Water-cooled) enclosure

Main features:

• Standard IP55, 380-415/3PH/50Hz motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• Factory-fill of SSR UltraCoolant
• Intellysys TM capacity control system, featuring: finger-touch control panel, on-line/off-line modulation control with automatic start and stop
• First out annuciation
• 83 dB(A) Air-cooled low sound enclosure

Main features:

• Robust Cast Iron IP55, 380V ~ 415V/3PH/50HZ motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler with condensate separator
• Integral star delta starter
• Factory-fill of Ingersoll Rand UltraCoolant
• IntellisysTM SGv capacity control system featuring:
• Sequence up to 4 machines
• On-Line/Off-line control with automatic start & stop
• 15 event history record
• NEMA4 (IP65) Electrical Cabinet
• 75 dB(A) AC / 72 dB(A) WC low sound enclosure

Compressor options (separately available):

• PORO: Power Outage Restart sounder
• Outdoor modification +2 - 46oC (weather ingress protection only)
• Low ambient temperature Option (min -10 Degree C)
• Hi-Dust Filter
• X-tend food grade coolant factory filled and filter fitted
• Energy Recovery System(ERS)
• Package Pre-filters
• Pt100 thermistor on each windings and bearing for main motor
• control box space heater
• Soft Starter
• motor space heater
• Sea Water cooler (Cu/Ni)
• Remote start & stop control (Dry contact signal,distance > 1km)
• Stainless Steel (304) tubes for water cooler
• High Ambient Temperature for R90i (up to 55 Degree C)
• High Ambient Temperature for R110i (up to 55 Degree C)
• High Ambient Temperature for R132i + IE3 model (up to 55 Degree C)
• High Ambient Temperature for R160i + IE3 model (up to 55 Degree C)

Main features:

• Robust Cast Iron IP55, 380V ~ 415V/3PH/50HZ motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler with condensate separator
• Integral star delta starter
• Factory-fill of Ingersoll Rand UltraCoolant
• Xe microprocessor controller providing:
• Sequence up to 4 machines
• On-Line/Off-line control with automatic start & stop
• NEMA4 (IP65) Electrical Cabinet
• 75 dB(A) AC / 72 dB(A) WC low sound enclosure

Compressor options (separately available):

• PORO: Power Outage Restart sounder
• Outdoor modification +2 - 46oC (weather ingress protection only)
• Low ambient temperature Option (min -10 Degree C)
• Hi-Dust Filter
• X-tend food grade coolant factory filled and filter fitted
• Energy Recovery System(ERS)
• Package Pre-filters
• Modulation Control
• Pt100 thermistor on each windings and bearing for main motor
• control box space heater
• Soft Starter
• motor space heater
• Sea Water cooler (Cu/Ni)
• Remote start & stop control (Dry contact signal,distance > 1km)
• Stainless Steel (304) tubes for water cooler
• High Ambient Temperature for R90i (up to 55 Degree C)
• High Ambient Temperature for R110i (up to 55 Degree C)
• High Ambient Temperature for R132i + IE3 model (up to 55 Degree C)
• High Ambient Temperature for R160i + IE3 model (up to 55 Degree C)

Main features:

• Robust Cast Iron IP55, 380V ~ 415V/3PH/50HZ motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler and condensate separator
• Integral star delta starter
• Factory-fill of Ingersoll Rand UltraCoolant
• Xe microprocessor controller providing:
• Sequence up to 4 machines
• On-Line/Off-line control with automatic start & stop
• NEMA4 (IP65) Electrical Protection
• 74 dB(A) low sound enclosure

Main features:

• Robust Cast Iron IP55, 380V ~ 415V/3PH/50HZ motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler and condensate separator
• Integral star delta starter
• Factory-fill of Ingersoll Rand UltraCoolant
• IntellisysTM SGv capacity control system featuring:
• Sequence up to 4 machines
• On-Line/Off-line control with automatic start & stop
• NEMA4 (IP65) Electrical Protection
• 74 dB(A) low sound enclosure

Main features:

• Robust High Efficiency IP55, 400V/3ph/50Hz motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• Package Pre Filter
• Air or Water-Cooled aftercooler with condensate separator
• Integral star delta starter
• Factory-fill of Ingersoll Rand UltraCoolant
• Xe microprocessor controller providing:
• On-Line/Off-Line control with automatic start & stop
• 30 Languages available & selectable via the controller (English, Chinese, Korean, Thai & Berhasa Indonesia)
• 69+3 dB(A) low sound enclosure (per IS0 2151; 2004)
• Dimensions (mm): 2432 L x 1265 W x 2032 H

Main features:

• Standard IP55, 380-415V/3PH/50Hz motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air on Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• Factory-fill of SSR UltraCoolant
• IntellisysTM capacity capacity control system featuring
• Finger-touch control panel
• On-line/Off-line modulation control with automatic start and stop
• First out annunciation
• 83dB(A) AC low sound enclosure

Main features:

• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• Factory-fill of SSR UltraCoolant
• IntellisysTM capacity control system featuring:
• Finger-touch control panel
• On-Line/Off-line control with automatic start & stop
• 60% ~ 100% Modulation Control as Standard
• 80A/C, 80W/C dB(A) low sound enclosure

SOLD OUT

Compressor options (separately available):

• Remote control (Dry contact signal with Remote Start/Stop, state Feedback, General Alarm; distance > 1km)
• Power Outage Restart (PORO)
• Hi-Dust Filter
• NEMA 4 Electrics
• Outdoor Modification
• SSR H-1 Food Grade Coolant
• Low ambient temperature Option (min -10 Degree C)
• Sea Water cooler (Cu/Ni)
• Stainless Steel (304) tubes for water cooler
• motor space heater
• Pt100 thermistor on each windings and bearing for main motor
• control box space heater
• 4-20ma signal for package discharge temperature or pressure
• Soft Starter

Main features:

• Standard IP55, 380-415V/3PH/50HZ motor
• Rugged Ingersoll Rand airend with duplex tapered roller bearings
• No maintenance integral gear drive system
• Air or Water-Cooled aftercooler with moisture separator
• Integral star delta starter
• Factory-fill of SSR UltraCoolant
• IntellisysTM capacity control system featuring:
• Finger-touch control panel
• On-Line/Off-line/modulation control with automatic start & stop
• Remote Start/Stop Control
• 2 units lead-leg
• First out annunciation
• 75 dB(A) low sound enclosure

Compressor options (separately available):

• Food Grade Coolant
• Outdoor Modification Enclosure
• Power Out Restart Options (Intellisys units only)
• Power Out Restart Options (Electropneumatic units only)
• Modulation Control Option
• Low ambient temperature Option (min -10 Degree C)
• water separator & electronic drain valve
• High Ambient temperature Option* (max 50 Degree C)
• 500 liters receiver

Main features:

• Air-cooled design with 46℃(37KW) & 40℃(30KW) ambient continuous-duty rating
• High efficiency IP55, IEC frame, 400V/3ph/50hz TEFC motor
• Standardize with High Dust Filter
• Integral star delta starter
• Air Cooled aftercooler
• Self-adjusted Poly-vee belt drive
• Factory-fill of SSR Ultra Coolant
• IC: Intellisys relay controller
• On-Line/Off-line control with automatic start & stop

SOLD OUT

Main features:

• Air-cooled design with 40℃ ambient continuous-duty rating
• High efficiency IP55, IEC frame, 380-415V/3ph/50hz TEFC motor
• NEMA4 control box
• Integral star delta starter
• Air Cooled aftercooler
• Self-adjusted Poly-vee belt drive
• Factory-fill of SSR Ultra Coolant
• IC:Intellisys SE controller
• On-Line/Off-line control with automatic start & stop
• Low sound enclosure (68 - 69dBA)

SOLD OUT

Main features:

• Air-cooled design with 46℃(37KW) & 40℃(30KW)
• ambient continuous-duty rating
• Rugged IR airend with duplex tapered roller bearings
• Integral star delta starter
• tandardize with High dust filter
• Self-adjusted Poly-vee belt drive
• Factory-fill of SSR Ultra Coolant
• IC: Intellisys controller
• On-Line/Off-line control with automatic start & stop
• Low sound enclosure 69dBA
• High Efficiency " Energy Star" cycling refigerated air dryer
• Pressure dew point: 7℃-30KW,10℃-37KW
• R404a refrigerant

SOLD OUT

Main features:

• Air-cooled design with 40℃ ambient continuous-duty rating
• High efficiency IP55, IEC frame, 380-415V/3ph/50hz TEFC motor
• NEMA4 control box
• Integral star delta starter
• Air Cooled aftercooler
• Self-adjusted Poly-vee belt drive
• Factory-fill of SSR Ultra Coolant
• IC:Intellisys SE controller
• On-Line/Off-line control with automatic start & stop
• Low sound enclosure (68 - 69dBA)

SOLD OUT

Main features:

• Air-cooled design with 40℃ ambient continuous-duty rating
• Integrated modular airend with duplex tapered roller bearings
• 380v-415v/3ph/50hz, IEC frame, IP55 TEFC induction motor
• Automatic stop/start control & Constant Speed control
• Electro-Pneumatic controller
• Hot/ Cold Box Technology
• Low sound enclosure (65 - 69 dBA)
• Poly-V belt drive with easy belt tension control
• Ultra coolant with 2,000 hour serivce schedule
• 8,000 hour/ 2 year coolant change intervals
• High Efficiency " Energy Star" cycling refigerated air dryer
• Stainless Steel Plate heat exchangers
• Dual Filtration - General purpose and high efficiency filtration
• Integral High Efficiency Moisture Separator
• Integral compressor package high efficiency blower
• Single point condensate drain system with Electronic Drain Valve

SOLD OUT

Descriptions:

• Air-cooled design with 46℃ ambient continuous-duty rating
• Integrated modular airend with duplex tapered roller bearings
• 400v/3ph/50hz IP55 TEFC motor *
• Star-delta starter
• Automatic stop/start control & Constant Speed control
• Electro-Pneumatic controller
• Hot/ Cold Box Technology
• Rounded edges and no screws protruding design
• Low sound enclosure (72 dBA)
• Poly-V belt drive with easy belt tension control
• Ultra coolant with 2,000 hour serivce schedule
• 8,000 hour/ 2 year coolant change intervals

Option Notes:

1. Voltage tolerance is 400 ±10%; with "380 / 415" shown on the motor nameplate
2. High Ambient Temperature option is not available for R11IU
3. ASME receiver tank is with MOM certificate

Air-cooled design with 46℃ ambient continuous-duty rating

• Integrated modular airend with duplex tapered roller bearings
• 400v/3ph/50hz IP55 TEFC motor *
• Star-delta starter
• Automatic stop/start control & Constant Speed control
• Electro-Pneumatic controller
• Hot/ Cold Box Technology
• Rounded edges and no screws protruding design
• Low sound enclosure (72 dBA)
• Poly-V belt drive with easy belt tension control
• Ultra coolant with 2,000 hour serivce schedule
• 8,000 hour/ 2 year coolant change intervals

SOLD OUT

Welcome to Ingersoll-Rand's UP-Series Rotary Air Solutions, a new standard of performance. The right choice to maximize productivity.

At the same time as eliminating your task of selecting separate components and reducing the extensive space requirements of traditional compressed air system, the Total Air System will provide your business with maximum efficiency, realibility, flexibility and productivity.

Achieve highest productivity and lowest total cost ownership:

1. Ultimate reliability with 75% fewer connections

• Smart integration eliminates leaks and pressure drops maximizing reliability

• Small footprint frees up valuable floor space and reduces install costs

• Oversized, high efficiency motor mount blower. Sound levels as low as 65 dBA.

• Auto start/stop operation with constant speed control for maximum flexibility

• Visual indication of operating status, hours & fault warnings for ease of operation and reduced downtime

• Premium drive system to minimize belt stretching and increase air output

7. Advanced cooling

• Hihg efficiency, oversized combination cooler with roof mount discharge for ease of ducting

8. Generous serviceability

• Spacious design for ease of serviceability

SOLD OUT

• Heavy duty cast iron pump
• Premium quality
• Powder coat painting enhances antirust
• Greater realiability
• Efficient cooling system
• Long term durability
• Regulation: Auto Stop/Start, 2340 thru 2545. Constant speed 7100 thru 3000 series
• Centrifugal unloader on 2545, 7100, 3000 & H15T
• Star-Delta starter on 2545C10/12 SD, Premiere Package and Standard Package with motor Horse Power above 20HP (includes 20HP)
• Receiver ASME - 220 PSIG (15.2 kg/cm2) max. Operation temperature 250°C
• Tank mounted model, starter mounted on machine
• Baseplate mounted model, DOL starter mounted on machine, SDS starter shipping loose with machine

• Heavy duty cast iron pump
• Premium quality
• Powder coat painting enhances antirust
• Greater realiability
• Efficient cooling system
• Long term durability
• Regulation: Auto Stop/Start, 2340 thru 2545. Constant speed 7100 thru 3000 series
• Centrifugal unloader on 2545, 7100, 3000 & H15T
• Star-Delta starter on 2545C10/12 SD, Premiere Package and Standard Package with motor Horse Power above 20HP (includes 20HP)
• Receiver ASME - 220 PSIG (15.2 kg/cm2) max. Operation temperature 250°C
• Tank mounted model, starter mounted on machine
• Baseplate mounted model, DOL starter mounted on machine, SDS starter shipping loose with machine

• Heavy duty cast iron pump
• Premium quality
• Powder coat painting enhances antirust
• Greater realiability
• Efficient cooling system
• Long term durability
• Regulation: Auto Stop/Start, 2340 thru 2545. Constant speed 7100 thru 3000 series
• Receiver ASME - 220 PSIG (15.2 kg/cm2) max. Operation temperature 250°C
• Tank mounted model, starter mounted on machine
• Baseplate mounted model, DOL starter mounted on machine, SDS starter shipping loose with machine

Standard equipment Bare Compressor:

1. Ball bearing compressor
2. Centrifugal unloader for 2545, 7100, 3000 and 15T only
3. Low level oil switch for 7100, 3000 and 15T only
4. Auxiliary valve when constant speed control is ordered
5. Pressure switch not included for auto stop/start control

Remarks:

• 2475A/ACCS-ICS & 2545A/ACCS-ICS are equipped with intercooler separator assy
• 2475A/ACCS-ICS must be operated on ASSC control only

SOLD OUT

• Regulation: Auto Stop/Start, 2340 thru 2545 series, H2340 thru H15T series
• Centrifugal unloader for no load start on 2545, series, prevents motor from starting under load. Eliminates possibility of motor burn out
• 100% cast icon frame and separately-cast cylinders
• Precison machined high quality cast iron cylinders with deep radial fins, suitable for heavy duty operation and longer life
• Heat treated stainles steel finger valve assemby, provides a large flow are resulting in lesser heat and carbon build-up. Easy removal & servicing
• Efficient finned intercooler tubes. 
• Runs cooler, resulting in a more efficient compressor that consumes lesser power and lasts longer
• Balanced overhung crankshaft
• Precision balanced for smooth running with replaceable crankpin bushing that protects the crankshaft from damage
• Rugged one-piece connecting rod
• Solid-end precision type. No bolts or nuts which can come loose
• Factory-filled syntetic lubricants, reduces carbon buildup, extends lubricant change period. Improves compressor performance and life span
• DOL starter mounted on machine, SDS starter shipping loose with horsepower 20hp and above

What do you get from a Premiere Package?

• Heavy duty cast iron pump
• Full time low oil level protection switch
• Efficient electric motor; TEFC IP54 protection, Clss Finsulation (Three phase)
• Highly reliable magnetic starter; Star Delta (15hp - 30hp)
• Aircooled after-cooler
• Time proven parts and components
• Totally enclosed wired sheetmetal beltguard for premiere packages
• ASME coded air receiver with 3rd party certification

SOLD OUT